Pattern | The pattern consists of 16 DINA4 pages, which you have to assemble according to this pattern: A1-A2-A3-A4 B1-B2-B3-B4....... D1-D2-D3-D4 |
---|---|
Instruction | INSTRUCTION Front insert The front insert is cut 4 times. 2 pattern pieces are intended as facings and can be cut from a different fabric (jersey, fleece). Sew in the zipper: Pin the zipper between the facing and the front piece. The teeth point towards the sleeve seam. Sew in place with straight stitch, turn right side out. Pin and sew the right side of the front panel insert to the right fabric edge of the neckline in the front panel, right sides facing. This seam ends 1 cm below the neckline edge. Repeat the same on the other side. In the lower corners (front part), make seam allowance-deep incisions in the direction of the end points of the seams (as with a polo closure). Fold the front piece right sides together at the slit bottom and carefully sew the trapezoidal seam allowance created when cutting in to the bottom edge of the front piece insert. Finish the edges of the fabric. Sew a kangaroo bag Turn the pocket opening seam allowance inwards and topstitch. Fold the bottom edge of the pocket seam allowance inwards and secure with pins. Turn the pocket 180 degrees ("upside down") and place right sides together on the front piece. Sew the top edge of the pocket with a straight stitch at the pattern markings. Fold the pocket down and topstitch the top and bottom edges. Assemble Pin the front and back pieces together, right sides facing, and sew the shoulder seams. Sew the sleeves onto the armholes, right sides facing. Sew the sleeves and side seam. Fold the sleeve and jacket hems inwards, topstitch and finish with a cuff if necessary. Hood Outer hood: Lay the hood pieces right sides together and sew. Inner hood: Repeat the process. Pin both hoods right sides together, sew the front edges together, turn right side out. Pin and sew the hood from the outer fabric to the neckline. Sew the inner hood only in the area of the front neckline, turn right side out. Fold the seam allowance of the inner hood (back neckline) inwards and topstitch from the right side. Topstitch the front insert close to the edge. Topstitch the front edges of the hood. We hope you have lots of fun sewing! All information on these products is subject to change. |
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.